Swivel Hoist Ring

• Available in UNC and Metric thread sizes.
• UNC threads available in sizes from 800 pounds to 100,000 pounds Working Load Limit, with a design factor of 5 to 1.
• Metric threads available in sizes from 400kg to 16,900kg and dual rated in both a 4 to 1 and 5 to 1 design factor.
• All Components are Alloy Steel - Quenched and Tempered.
• Rated at 100% at 90° angle.
• 100% individually proof tested to 2-1/2 times the Working Load Limit with certification and Statistically Magnetic Particle inspected. (Can be furnished 100% Magnetic Particle inspected when requested at time of order.)
• Each product has a Product Identification Code (PIC) for material traceability along with a Working Load Limit and the name Crosby or “CG” stamped into it.
• Crosby products meet or exceed all the requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, Crosby products meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26.
• 360° swivel and 180° pivot action.
• Fatigue rated to 20,000 cycles at 1-1/2 times the Working Load Limit.
• Individually packaged along with proper application instructions and warning information.
• Bolt is secured with E-clip, threads are grooved. This method allows for easy disassembly and assembly of hoist ring for thorough examination of all components. Replacement kits are available.
• Bolts are individually Proof Tested.
• Multiple Bolt length available to meet specific application requirements.
• Zinc Plated (Yellow Chromate) finish for increased corrosion protection thru 30,000 pounds size.

Heavy Lift Swivel Hoist Rings HR-1000

• Forged bail provides the following:
• Easily readable "Raised Lettering" showing the name Crosby or "CG" and PIC Code for material traceability.
• Greater durability providing the increased "Toughness" desired in potentially abusive field conditions.
• Larger opening than standard Hoist Ring bail.
• Top washer is color coded for easy identification (Red for UNC threads and Silver for Metric threads)
• The Working Load Limit and Recommended Torque value are permanently stamped into each washer.
• Individually Proof Tested to 2-1/2 times Working Load Limit.
• Available in both UNC Thread and Metric Thread style.
• BOLT SIZE IDENTIFICATION: The size of the bolt will be stated as in the drawing below.
Illustration shows meaning of each dimension given.
• NOTE: For Special Applications, see page 396.
• Frame 2 and larger are RFID EQUIPPED

Stainless Steel Swivel Hoist Rings SS-125

• All components are 316 stainless steel, except bolt retainers, which are made from 15-7 PH (UNS 15700) magnetic stainless steel.
• Available in capacities from 400 lbs. to 50.000 lbs.
• Rated at 100 percent at 90 degree angle.
• Each product has a Product Identification Code (PIC) for material traceability, along with the Working Load Limit and the name Crosby or "CG" stamped into it.
• Individually proof tested to 2 times the Working Load Limit with certification.
• Fatigue Rated to 20,000 cycles at 1-1/2 times the Working Load Limit
• Washer is color coded for easy identification (Red - UNC thread).
• Bolt specification is 316 Stainless Steel socket head cap screw to ASTM F 837 Group 1 (316). All threads listed are UNC.
• BOLT SIZE IDENTIFICATION: The size of the bolt will be stated as in the drawing below.
Illustration shows meaning of each dimension given.
• Frame 2 and larger are RFID EQUIPPED.